Back to site

Rega Rox Pro Spec Lock Knuckle - JZX90/100/110/SXE10

£165.00

Our most extreme lock kit yet! Designed and tested in-house.

Zero ackerman.

2 turns lock to lock.

30mm Roll Center Correction.

Angle depends on supporting mods such as aftermarket tension rods and alignment settings. Pete's Altezza has achieved around 60 degrees of lock with this setup. More than you would ever need.

Made from 7000 series aluminium.

Recommended for use with Toyota Corolla _E10_ [1992-1997] track rods and OEM track rod ends. Minor shortening of the Corolla track rods required.

Professional installation highly recommended.

Will be supplied with 12.9 grade bolts.

Ideally requires 40mm extended lower arms for wheel clearance. And 30mm shortened hubs to raise the roll center even further. Please contact us and we can offer these on exhance basis within the United Kingdom

Suitable for JZX90/100/110/SXE10 chassis.

Pete's Altezza Front Setup:
17x9.5 et 15 Wheels +20mm spacer to clear on lock (Use combined offset to gauge your setup requirements. Wheel offset dependant)
40mm Extended Lower Arms
30mm Shortened Hubs
Cusco Camber Arms
Aftermarket Tension Rods with Extra Clearance
Corolla Track Rods
45mm Wide Fenders